VSAT Voltage Booster
The vBoost is a VSAT voltage booster power supply that acts as a buck or boost for inputs from 5 to 30 Volts with 15V and 13.8V outputs.
In earth stations and VSAT installations, this device is ideal for boosting voltages on long cable runs. The 13.8V output is a low noise linear regulated output that has good PSRR which can help reduce phase noise in transmit or receive chains.
On long Intra Facility Link (IFL) cable runs, the DC resistance of the coaxial cable will typically result in a drop in the voltage at the cable output. For example on a 100m cable run of Belden 9913 the voltage loss at 12V would be approximately 0.5 Volts assuming the equipment draws 1 amp. As the current draw increases, the voltage drop will also increase.
Feel free to contact SilverTip Telematics for any inquiries – Chat with us live or contact us
Low PSRR, Low Noise power supply for sensitive applicaitons
Cost effective solution
Committed in providing great quality at reasonable price
- Several connector types supported
- Alternate output voltages by special order
- Low PSRR
- Wide input voltage range
- Rugged anodized aluminum enclosure
- 10-32 mounting holes
The vBoost is a low noise DC voltage booster. Useful for long cable runs or when you need to ensure voltage is maintained with varying loads.
<put image here>
- Long cable runs
- Mobile installations
- Industrial control systems
- Protection of devices with varying loads